Product Description
1. The appearance is transparent.
2. It can be used for cotton fabric, chemical fiber , polyester fabric, Polyamide, oxford fabric and PVC&PU leather materials' bonding.
3. It is also can used for plastics, rubber including Ethylene-Propylene-Diene Monomer (EPDM) bonding (rubber have to do the pre-treatment).
4. And it can also be used for fiber fabric, plastic, metal, wood, ceramic and other materials bonding.
Storage condition: store in cool and dry condition.
Production Introduction
The Car door frame wrapped velvet belt product is used for automotive seals to coat, so that the interior is beautiful, in the high-speed running of the vehicle played a shock-proof and noise-reducing function. Through the Shanghai Volkswagen high and low temperature detection, SOC ten tests, and has made China's national invention patents. The main cooperative vehicle enterprises are: Shanghai Volkswagen, Chinese First Automobile Works Volkswagen, Guangzhou automobile. Car models include Audi, TOYOTA, BYD, Volvo, Geely, the Great Wall.
Automotive interior materials bonding (central control, metal + injection parts, coat rack, trunk pad)
Product Parameters
For examples,below is our WT-216 Product Physical Property Sheets,it can use for laminating the fabric.
| Physical Property |
Performance Index |
Units |
Testing Method |
| Softening Point(Ring and Ball) |
100±5 |
ºC |
ISO6351 |
| Hardness |
70 |
A |
ISO2039-2 |
| Viscosity(180ºC) |
80±20 |
Pa.s |
180ºC |
| Melt Flow Index |
15-20 |
g/10mins |
2.16KG,175ºC |
| Tensile Strength |
≥30 |
kg/cm2 |
ISO8256 |
| Elongation |
≥800 |
% |
HG/T580 |
Jiangyin Weitao Plastics And New Material Co., Ltd is a company which produces the hot melt adhesive and hot melt adhesive films works,it is a National high-tech enterprise and obtains a lots of National invention patents,and also passed the ISO9001.Our hot melt adhesive film products are environmental-friendly,it can instead of the traditional solvent adhesive.In order to adapt the update and replace for the furniture industry,We have developed the ultra thin 10-50 g/m3 low cost laminating adhesive film,and the ultra thick 0.8-1mm adhesive film.And this Ultra thick hot melt adhesive is nice softness and high hardness ,it can use for many special application fields.Our company has been devoting to furniture industry for many years,our adhesive film can be customized with flame-retardant ,remove formaldehyde,antibacterial and mildew proof property etc.
Steps for usage
To bond TPO materials using hot melt glue film, the following steps are usually involved:
1. **Surface Preparation**: It's important to ensure that the surfaces to be bonded are clean and free of any dust, dirt, or contaminants. This helps to ensure a strong and reliable bond.
2. **Heating the Glue Film**: The hot melt adhesive film for car interior is typically activated by heat. Using a heat press or other heating equipment, the glue film is heated until it reaches the appropriate temperature for bonding.
3. **Application**: Once the glue film has been heated, it is placed between the TPO materials to be bonded. Pressure is applied to ensure that the adhesive makes full contact with the surfaces.
4. **Cooling and Curing**: After the adhesive has been applied and the materials have been bonded, the assembly is allowed to cool and cure. This helps to ensure a strong and durable bond between the TPO materials.
5. **Testing**: It's a good practice to test the bond strength of the assembly to ensure that it meets the required specifications and standards.
Product Application
If water is dispersed into small droplets on clothing fabrics, backpacks, shoe upper, etc., and then slides down, it is usually because the fabrics used have been treated with water repellent, and at the same time the fabrics must have good air permeability and moisture permeability. Therefore, the surface of water repellent fabrics is dense and difficult to bond. We have developed a new adhesive film for waterproof fabric material for this purpose. The hot melt adhesive with strong wetting ability meets the requirement of the adhesive.
The bonding between ABS/PC/PV castings and metal aluminum is tested by PV1200. It is used in automobile central control, door pedal and door frame.
Product Application
Packaging & Shipping
Dear customer,you can pack the goods as carton or rolls.All is can made according to your request.
Certifications
Our Advantages
We are the factory,we have good product quality and competitive price.
We are a high-tech enterprise with super high technology and super research and deveopment capacity.
We have a good R & D team,R & D personal are not least postgraduate dgree.
FAQ
I want samples,is that free?
Yes,the less samples is free.But the charge for the express have to paid by you.This is our company rules,hope your understanding Thanks!
What mode of transport can I choose?
Dear,You can choose the shipping,air shipping,and Fedex,DHL,UPS express etc.
What is the MOQ?
MOQ is 1000kg or 1000 sqm.
){kind=link}